UPHOLSTERED ESD CHAIRS
2010 List Prices (Discounts available)
Static electricity is created all the time at home and at the workplace. In normal circumstances hand contact with a conductive material will discharge static from the body very rapidly. This is ESD (Electro Static Discharge).
Static electricity has become a major problem in the electronics industry. The presence of inherent ESD is not easy to detect. Product damage may go undetected at the production stage, but lead to failure at a later date. Once the potential dangers of ESD damage are understood, effective methods of prevention can be put in place.
All-inclusive protection from electrostatic discharge is a necessity whenever modern electronic devices are handled. An EPA (Electrostatic Protected Area) should always use ESD protected materials to prevent component damage. Protection should systematically extend from goods inwards areas to final test and packaging.
The chairs below provide ESD protection in just such environments.
Upholstered ESD Chairs
Click on the image for a bigger picture.
Construction
Scandinavian design
optimum ergonomics
height adjustment by gas lift: 420 ... 5605 mm
seat: 445 x 455 mm
back rest: 370 x 275 mm
angle and height of the back rest and tilt of seat are adjustable
the base has five twin 50 mm dia. conductive swivel castors which are automatically braked when not loaded
base: anodised aluminium
ESD-textile: 95% polyacrylic, 5% polyester with stainless steel fibres
abrasion resistance: 40 000 Martindale
light fastness: 6 (ISO 1-8)
flammability: EN 1021/1
ESD Draughtsman Chair
Construction
Scandinavian design
optimum ergonomics
height adjustment by gas lift: 515 ... 775 mm
seat: 445 x 455 mm
back rest: 370 x 275 mm
angle and height of the back rest and tilt of seat are adjustable
height adjustable footrest and conductive floor glides to improve work safety
base: anodised aluminium
ESD-textile: 95% polyacrylic, 5% polyester with stainless steel fibres
abrasion resistance: 40 000 Martindale
light fastness: 6 (ISO 1-8)
flammability: EN 1021/1
ESD Synchro office chair
Click on the image for a bigger picture.
Construction
Scandinavian design
optimum ergonomics
high quality Italian Syncro tilt mechanism allowing the angle of the seat and back to be adjusted with one lever and your body weight
height adjustment by gas lift: 420 ... 560 mm
depth adjustment of seat
seat: 475 x 455 mm
back rest: 510 x 430 mm + head rest 100 mm
the base has five twin 50 mm dia. conductive swivel castors which are automatically braked when not loaded
base: anodised aluminium
ESD-textile: black, 94% wool, 4% polyamide, 2% steel fibre
abrasion resistance: 50 000 Martindale
light fastness: 5 (ISO 1-8)
flammability: EN 1021/1-2
Saddle Stools
Click on the image for a bigger picture.
Construction
Grey conductive upholstery (Picture shows a non ESD Blue finish)
The saddle seat with adjustable tilt provides comfort and an ergonomically correct sitting position
Seat height: 540... 800 mm
These are popular where the operator needs to move around the workpiece and are a lot more comfortable than they look.