Mesh Partitions
This is a low cost integrated single skin steel partition system suitable for a wide range of applications, including industrial offices, storage areas, factory dividing walls.
A comprehensive range of single and double swinging doors, sliding doors and hatches are available. These can be fitted with most types of locks and latches, including interlocks.
The panels are bolted together using M8 bolts and nuts, the panels are also fixed to the floor with pan head screws and 6mm plastic plugs. Posts are used every third panel and are fixed to the floor with 12mm anchor bolts and in-fills come as 21 SWG CR4 sheet steel or 50mm x 50mm x 12SWG weld mesh.
Technical Information | |
Standard Panel Heights: | 2440mm and 3050mm |
Standard Panel Widths: | 1220mm, 1000mm, 915mm, 610mm and 305mm |
Dado Height: | 1220mm |
Single Doors: | 1980mm high x 915mm wide |
Double Doors: | 1980mm wide x 1806mm wide |
Welded Mesh Sheet: | 50mm x 50mm x 12 SWG |
Windows: | Up to 6.4mm glass set in plastic glazing bead |
Posts – 2 Way | 80mm x 40mm x 3mm |
Posts – 3 Way & Corner: | 80mm x 40mm x 3 mm |
Standard Paint Finishes: | Yellow RAL 1018, Grey BS00A05 And Sandstone BS08B17 |
Construction: | Cold rolled mild steel angle and cold rolled tees with sheet steel or welded mesh infill sheets spot welded together |