Locker Room Design Guidance

Information on lockers and helpful tips on providing storage solutions for staff and visitors.

Guidance to Locker Room Design Important factors to consider (2012 Update)

1. The size and configuration of the locker compartment will be determined by the items to be stored e.g. the need to hang garments,size of bags/holdalls,the storage of motor cycle helmets and footwear etc.
2. Is there a need to store workwear separately from personal clothing if so then PPE or Clean/Dirty locker options are available.
3. If hygiene is important consider a factory fitted sloping top option on lockers. This prevents an unwanted build up of dirt and debris and also encourages storage within the locker and not outside. locker stands can provide cleaning access to beneath the locker.
4. Check floor surfaces are level, lockers are designed to be floor standing. To overcome uneven floors locker stands are supplied with adjustable feet.
5. Will users be changing footwear?, it would be useful to offer freestanding benches or an integral seat and stand option.
6. Is there a need to air damp clothing?, then consider lockers where garments can be hanged or opt for a compartment locker with perforated holes or mesh construction to increase air circulation.
7. Type of lock required - key camlock, padlock type fitting, £1 coin or token return lock options available.
8. Additional locker accessories e.g hanging rail, sloping top, number plates etc.
9. Is there a need for locker compartments to be visually monitored. Perforated doors or the new Perspex doors allow inspection from outside the locker.
10. Factors relating to the positioning and off-loading of lockers should be considered e.g. will labour be required. Nested lockers are more difficult to manoeuvre than single lockers though cheaper to purchase.

Lockers and Personal Storage solutions for the UK

Available in 7 to 10 days

Link To PDF on Laptop / Mobile Phone Lockers

Designer one piece lockers
For clean or dirty use, designer one piece lockers incorporate ventilation holes from top to bottom and are mounted on raised feet. Multi-compartment version available for clean use.
For clean or dirty use, designer one piece lockers incorporate ventilation holes from top to bottom and are mounted on raised feet. Multi-compartment version available for clean use.

D x H cm : 50 x 180. One piece sheet steel shells on raised feet in a light grey epoxy finish. Locks on each door. Designer doors in blue or light grey. Multiple perforations. All doors come complete with label holders. Available in 3 versions : clean use industrial lockers, dirty use industrial lockers or multi-compartment lockers.

Clean use industrial lockers Interior fittings: coat rail, upper storage shelf.

Dirty use industrial lockers Interior fittings: coat rail, central partition, upper and lower storage shelves.

Standard one piece lockers
A classic range of clean or dirty use industrial lockers. Raised feet and hasp optional.
D x H cm : 50 x 180. One piece sheet steel shells in a light grey epoxy finish. Locks on each door. Standard doors in light grey. Upper and lower vents for air circulation. Available in 2 versions : clean use or dirty use.

Clean use industrial lockers Interior fittings: coat rail, upper storage shelf.
 

Self assembly lockers
Self assembly industrial lockers. Quick and easy to assemble – no nuts and bolts required.
D x H cm : 50 x 180. Quick and easy to assemble, no nuts and bolts required. Made from sheet steel in a light grey finish. Upper and lower vents for air circulation. Hasp attachment for padlock. Available in 2 versions : clean use industrial lockers or dirty use industrial lockers. 2 door colours to choose from : light grey (GR) or blue (BU). Adhesive label holder.

Office lockers
Of one piece design, office lockers come in a choice of three colours to match the office furniture ranges.

W x D x H cm : 40 x 50 x 198. One piece sheet steel construction. Interior fittings : coat rail, shelf. Rear air vents (not visible from the front).

Wardrobe units
160 cm and 120 cm tambour cupboards, complete with hanging space.

Coat rail units
Mobile unit for self assembly. Will hold 20-25 hangers.

W x H cm : 146 x 160. Easy to assemble and dismantle. Made from chrome plated tubular steel, Ø 3 cm. Fitted with four swivel castors.

Please click on the Adobe icon below to view the electronic catalogue on lockers or contact us for your free paper version.

Clean Room Lockers

KEEPING CLEAN
Keeping clean garments and soiled work overalls separate can often be a problem. The Clean and Dirty Locker solves this by providing a centre partition with a double coat hook to either side. Identical in overall size the Uniforms Locker has three handy shelves to one side of the partition.

CLEAN & DIRTY LOCKER
Complete with full width internal top shelf 305mm high, vertical centre partition and two double coat hooks.

• WIDTH 460mm
• DEPTH 460mm
• TOP COMPARTMENT HEIGHT 305mm

UNIFORMS LOCKER
Complete with full width internal top shelf 305mm high, vertical centre partition, double coat hook and a further three half width shelves.

• WIDTH 460mm
• DEPTH 460mm
• TOP COMPARTMENT HEIGHT 305mm

Please contact is with Quantities and Delivery area so that we can offer a competitive quotation.

Please call 0845 124 9955 for the latest prices and information or use the Contact Us form if outside UK Office Hours

Workwear Lockers

We can supply a wide selection of lockers for workwear and safety clothing. The steel lockers have twin compartments to segregate clean and dirty and work clothing and personal clothing. With many different lock options and a variety of sizes we can offer a solution for every workplace.

Clean and Dirty Locker

Clean & Dirty Lockers

Two vertical compartments to separate workwear and daywear
Sloping top option
3 point locking, subject to minimum order quantity
Integral seat and stands available

FITTINGS
Vertical Central Divider
Shelf, Clearance 235mm
Double Coat Hooks
Name Plate Holder

534mm (21") Extra deep locker available subject to minimum
order quantity

Combi Locker

Combination Lockers

Ideal for the storage pf personal possessions and equipment
Vertical hanging compartment plus storage compartments
3 point locking, subject to minimum order quantity
Integral seat and stands available
Sloping top option

FITTINGS
Hanging Rail
Shelf, Clearance 235mm
4 No. Storage Compartments 340mm High
Name Plate Holder

534mm (21") Extra deep locker available subject to minimum
order quantity

Two Person Lockers

2 Persons Lockers

Space saving unit
Each user having a vertical hanging and a personal possession compartment
Sloping top option

FITTINGS
Double Coat Hooks
Name Plate Holder

534mm (21") Extra deep locker available subject to minimum
order quantity

Twin Locker

Twin Lockers