Recycling banks are designed to collect glass, paper or textiles and create an ideal mini recycling system in civic community sites and car parks. They are available in a range of colours and capacities (1.5 m³ or 2.5 m³). All space saver bank visually look the same externally to create uniformity and have minimal impact to the aesthetics of public areas.
Space saving recycling units are designed for high visibility locations where visual amenity is important including city centres, car parks, residential areas and roadsides. Space saving can collect glass, paper or textiles and create ideal mini recycling systems in civic community sites and supermarket car parks
- One style, two sizes. Space-saver 2.5 cubic metre measures 1165 mm x 1750 mm high.
- Space-saver Junior 1.5 cubic metre measures 890 mm wide x 1440 mm deep x 1480 mm high.
- Through-coloured polyethylene in any colour from our current selection.
- Choose the 2.5 cubic metre with 1 tonne capacity and fit four side by side each in one adjoining car parking space.
- Or the 1.5 cubic metre with 1/2 tonne capacity will fit five side by side in four adjoining car parking space.
- A wide range of factory fitted options are available.
- Robust one piece body construction.
- Long life plastic doors
- Standard contractor HIAB emptying
For the disabled members in the community who wish to do there bit for the environment. We offer a Disabled Posting Port. This option cannot be retro-fitted, it can only be fitted in new build banks this is because it has its own chute for depositing which cannot be fitted after the initial build. Security Kits
All our Recycling banks with circular ports can be fitted with this smart polypropylene circular brush strip mounted in an aluminium extrusion. A bottle can be inserted through the brush strip but removal is made much more difficult as it is not possible to see inside the bank and the hand has to be pushed through the brush strip. The seal further reduces the sound emissions for those sites where noise pollution could be an issue.
The state-of-art in silenced banks. The bank is fitted with the security/hush kit and then the upper area of the bank is lined with sound absorbing material.
Customised Name Plates
During the moulding process instructions or logos can be moulded in. These details are then prominently displayed on the surface and are painted to enhance their appearance. Unlike transfers or stickers these details cannot be scratched off.
Chutes are fitted to the posting ports which extend down to the base of the bank. The chutes are designed to slow the bottle down after posting. The design of the chutes allows bottles to spill off the sides as the bank fills up, so bottles never have to fall more than a few centimetres. Sound reductions of 85% are achievable with Muffler specified banks.
All banks are available with large posting ports. These allow a full crate of empties to be posted in one go. Ports are available with locks.
Some of our customers prefer to empty can banks through a side door. We fit a net inside and the bank can be emptied without the use of HIAB type vehicle.
Latest Design Recycling Banks
The rounded design fits discreetly into the street scene, while the design of the plinth allows precise positioning of several containers.
– Can be emptied by one person
Grey RAL 7037