The data shown are the result of laboratory tests and are intended to serve only as a guide. No performance warranty is intended or implied. The degree of chemical attack on any material is governed by the conditions under which it is exposed. Exposure time, temperature, and size of the area of exposure usually varies considerably in application, therefore, this table is given and accepted at the userʼs risk. Confirmation of the validity and suitability in specific cases should be obtained. When considering XR-5 for specific applications, it is suggested that a sample be tested in actual service before specification. Where impractical, tests should be devised which simulate actual service conditions as closely as possible.

Rating Key:

  • A – Fluid has little or no effect.
  • B – Fluid has minor to moderate effect.
  • C – Fluid has severe effect.
  • T – No data – likely to be acceptable.
  • X – No data – not likely to be acceptable.
Exposure  Rating 
AFFF 
Acetic Acid (5%) 
Acetic Acid (50%) 
Ammonium Phosphate 
Ammonium Sulfate 
Antifreeze (ethylene glycol) 
Animal Oil 
Aqua Regia 
ASTM Fuel A (100% Iso-octane) 
ASTM Oil #2 (Flash pt. 240 C) 
ASTM Oil #3 
Benzene 
Calcium Chloride Solutions 
Calcium Hydroxide 
20% Chlorine Solution 
Clorox 
Conc. Ammonium Hydroxide 
Corn Oil 
Crude Oil 
Diesel Fuel 
Ethanol 
Ethyl Acetate 
Ethyl Alcohol 
Fertilizer Solution 
#2 Fuel Oil 
#6 fuel Oil 
Furfural 
Gasoline 
Glycerin 
Hydraulic Fluid - Petroleum Based 
Hydraulic Fluid - Phosphate Ester Based 
Hydrocarbon Type II (40% Aromatic) 
Hydrochloric Acid (50%) 
Hydrofluoric Acid (5%) 
Hydrofluoric Acid (50%) 
Hydrofluosilicic Acid 
Isopropyl Alcohol 
Ivory Soap 
Jet A 
JP-4 Jet Fuel 
JP-5 Jet Fuel 
JP-8 Jet Fuel 
Kerosene 
Magnesium Chloride 
Magnesium Hydroxide 
Methanol 
Methyl Ethyl Ketone 
Mineral Spirits 
Naphtha 
Nitric Acid (5%) 
Nitric Acid (50%) 
Perchloroethylene 
Phenol 
Phenol Formaldehyde 
Phosphoric Acid (50%) 
Phosphoric Acid (100%) 
Phthalate Plasticizer 
Potassium Chloride 
Potassium Sulfate 
Raw Linseed Oil 
SAE-30 Oil 
Salt Water (25%) 
Sea Water 
Sodium Acetate Solutions 
Sodium Bisulfite Solution 
Sodium Hydroxide (60%) 
Sodium Phosphate 
Sulfuric Acid (50%) 
50% Tannic Acid 
Toluene 
Transformer Oil 
Turpentine 
Urea Formaldehyde 
UAN 
Vegetable Oil 
Water (200F) 
Xylene 
Zinc Chloride 

Information Copywrite ENPAC USA

 

Company Information

Vat GB591551821

Company Number 02906480

NATO Code Number (NCAGE KD520)

image003image004

Office Hours 9am to 5pm Monday till Friday

Except for UK National Holidays.

Call 01752 690622  Fax 0208 196 2223

sales@mipl.uk