Anti static and electrically conductive wheels are categorised according to level of resistivity. Antistatic wheels generally have resistivity ratings of below: 10 ^ 6 Ω (ohms). Electrically conductive wheels have a resistivity rating below: 10 ^ 4 Ω (ohms). Please view our range of wheels below.

WPNEC WAPA antistatic wheels

Steel and Cast Iron wheels offering the maximum strength for similar diameter. Wheel diameters from 50 to 300 mm and weight capacity of 100 to 7,500 kg. Specially machined to order wheels are also available for specialist applications.

WCI SERIES wheels

Hooded twin-wheel furniture castors. Housing and wheel made of black nylon, with pressed steel, zinc-plated fixings.

BZTW SERIES CHAIR CASTORS

Cushion wheels – the alternative to spring-loaded castors and foam-filled tyres. Used for the safe transportation of delicate instruments around industrial sites.

WSRER Cushion rubber wheels

Blue solid elastic rubber tyres on aluminium core rim is the most popular wheel in this range though we also supply the wheel with grey or black elastic rubber tyres. With a wheel diameter range of 125 to 200 mm and load capacity range of 500 to 700 kg.

WPK SERIES wheel

Gate castors are a specialist system designed to help take out the variation in ground heights and are mostly used on large gates travelling over uneven ground. The maximum height difference is 75mm or 3 inches with a weight on the castor of no more than 70kg. 

BZGC CASTORS SERIES

For many customers the wheel or castor is a replacement for an existing castor or wheel so they generally want the same but if you are manufacturing and designing a mobile product then the guide below on castors and wheels may help you decide the layout, type of wheel and bracket.
CASTOR-GUIDE
 

A range of castors are available for use in extreme temperature environments. The castors are available with either a zinc-plated pressed steel or stainless steel housing and choice of solid thermoplastic wheels. These castors can operate in temperatures as high as 300°C (please see specific casters specification).
BZXM/MH CASTORS SERIES

A selection of specialist wheels suitable for high temperature applications of up to 350°C. With a wheel diameter range of 75 to 200 mm and load capacity range of 75 to 900 kg. Materials Phenolic resin, Ditherm and Nylon and Epoxy Resins. Technical Brochure at the bottom of this page.
WAN SERIES

Jacking castors can be used to vary the height of a platform or piece of equipment between 75 and 200 mm depending on the models shown below. The jacking castor can also be used to raise a platform off of feet so that it can be moved easily around your work space.

Jacking Castors for the UK wide range with quick deliveries

Jockey wheels are primarily used on caravans and trailers though they can be used on various applications where adjustable height and mobility are required. Our three options below are available from stock with normal delivery taking 3 to 5 days.

Jockey wheel with clamp and pnuematic tyre

These castors are designed for manufacturers of trolleys and specialist applications and are available on next day delivery in a wide range of sizes and weight capacities.  The different types of brackets make these ideal for any application.

BZD SERIES CASTORS

Low level castors are a special type of castor offering the weight loading of a normal larger diameter castor but in a smaller wheel.  This is acheived using different materials and the use of twin wheels in the same bracket.  Primarily used where the height of the trolley or product on top cannot be to high or where added stability is required.

LOW LEVEL CASTORS SERIES

Nylon wheels are one of the most popular selling wheels due to their strength and economical costs. Stronger than polypropylene they are chemical and liquid resistant and offer a weight loading up to 12,000 kg.  A comprehensive brochure is available at the base of this page and nylon wheels are stocked in large quantities.

WNY SERIES wheels

Pallet rollers, either solid nylon (polyamide 6) or polyurethane tyres on nylon (polyamide 6) or steel core. 

PALLET ROLLERS

Pallet truck steer-wheels, either solid nylon (polyamide 6), solid polyurethane or elastic rubber or nylon (polyamide 6) on an aluminium core.

PALLET TRUCK STEER WHEELS

Pneumatic wheels provide a cushioned ride for sack trucks, trolleys and platforms making them ideal for rough ground. These pneumatic wheels have plastic centres and we also have pneumatic wheels with steel centres and puncture proof cushioned wheels here.
WPP SERIES wheel

Solid white or black polypropylene wheels. With a wheel diameter range of 40 to 400 mm and a load capacity range of 50 to 330 kg. Hard working and economical wheel that is also used as guide rollers in tracks.

WPL SERIES Wheels

Polyurethane tyre on aluminium rim. With wheel diameter of 80 to 200 mm and load capacity of 200 to 800 kg. Available in a selection of colours. As with all our wheels these can be used on your own axles or to replace worn wheels in existing castors and supplied in a wide range of castor brackets depending on your requirements.

WPA SERIES

Brown or yellow polyurethane tyre on black cast iron wheel. With a wheel diameter range of 50 to 500 mm and load capacity range of 80 to 4500 kg.As with all our wheels these can be used on your own axles or to replace worn wheels in existing castors and supplied in a wide range of castor brackets depending on your requirements.

WPT SERIES wheel

 
Polyurethane tyre on nylon (poly-amide 6) rim. With a wheel diameter range of  80 to 200 mm and load capacity range of  200 to 750 kg. Available in a selection of colours.
 
WNP SERIES
WNP SERIES

Polyurethane Tyres on Polypropylene Centre Wheels. Red polyurethane tyre on polypropylene rim. With wheel diameter range of 100 to 200 mm and load capacity range of 200 to 300 kg.

WPU SERIES
WPU SERIES wheels

Puncture proof wheels are composed of a micro-cellular polyurethane type rubber offering an alternative to pneumatic wheels but without the problem with valves or punctures.

Puncture Proof Wheels

Elastic rubber tyre on aluminium rim. Wheel diameter range of 100 to 300mm and load capacity range of 160 to 800kg.

WER SERIES

Elastic rubber tyre on cast iron rim. With a wheel diameter of 100 to 400mm and load capacity range of 160 to 1050kg.

WCR SERIES

Blue elastic rubber tyre on black nylon (polyamide 6) rim. With wheel diameter range of 50 to 250mm and load capacity range of 40 to 500kg.

WRN SERIES

A range of wheels with rubber tyres on polypropylene rims. Available in a selection of sizes, load capacities and colours. With capacities up to 350kg these plastic centred wheels can be used in a wide range of applications and all of the wheels shown can be mounted in a wide range of brackets and supplied as a complete castor.

WGR SERIES

Black solid rubber tyre on either welded zinc-plated or bolted powder-coated steel rim. With a wheel diameter range of 80 to 400mm and load capacity range of 50 to 700kg.

WBS SERIES

  Specially designed skates for moving scenery, three pressed steel, zinc plated swivel castors fitted on a black fabricated frame with a separate top plate fixing and available with a choice of wheels.

SCENERY SKATES

When a standard caster solid or pneumatic wheel just won't do then we have the answer with a range of specials. Spring loaded castors are generally heavy duty and allow for the safe transportation of equipment over uneven ground.

BZKL-SPR CASTORS SERIES

Stainless steel castors are generally used on trolleys, machinery and equipment used in food processing, catering and medical sectors or indeed whenever there is a requirement for a high level of hygiene to be maintained. Because the casters are made of stainless steel this makes them ideal for use when stringent wash-down procedures are employed.

SSXM CASTORS SERIES

Solid ductile steel wheels. Wheel diameter range of 50 to 300mm and load capacity ranging from 135 to 5500kg

WST SERIES wheels

Tente has the motto "Better Mobility. Better Life" and with 85 Years of experience their castors and wheels are both dependable and one of the best engineered products available. Tente operates in 25 countries spanning 5 continents.

tente-logo

Truck locks are an easy way to retrofit brakes to a trolley or mobile platform. The truck locks have a foot operated pad that lowers a pad normally with a rubber surface down to the floor raising the wheels slightly above the ground. 

TRUCK LOCKS

To increase loading capacities whilst maintaining the same height the twin wheel castor was developed.  Depending on the wheel type and loading requirements there are four ranges with capacities up to 7500kg.

2BZXXH twin wheeled castor

Black-painted cast-iron 90° v-groove wheels for use on inverted angle-iron tracks or flange wheels with 3° tread ascent. With wheel diameter range of 75 to 200mm and load capacity range of 200 to 1500kg. Specialist wheels designed to run on tracks or guides with the V-grooved wheels ideal as sophisticated pulleys for a wide range of applications.

WCV SERIES wheels

 

Company Information

Vat GB591551821

Company Number 02906480

NATO Code Number (NCAGE KD520)

image003image004

Office Hours 9am to 5pm Monday till Friday

Except for UK National Holidays.

Call 01752 690622  Fax 0208 196 2223

sales@mipl.uk