Anti static and electrically conductive wheels are categorised according to level of resistivity. Antistatic wheels generally have resistivity ratings of below: 10 ^ 6 Ω (ohms). Electrically conductive wheels have a resistivity rating below: 10 ^ 4 Ω (ohms). Please view our range of wheels below.

WPNEC WAPA antistatic wheels

 

Wheels shown above are the WPNEC and WAPA Series

Whilst the term anti-static generally refers to its ability not to generate a charge upon frictional contact with another material, if a charge is generated, it will be a fraction of what would otherwise be the case through a type of contact electrification known as the triboelectric effect.

Conductive materials on the other hand allow charges to go to ground more easily and thereby protect against shock or damage to equipment which is sensitive to electrostatic discharge (ESD). That said, it is generally recommended that electrically conductive wheels are used within environments where sensitive electronics are in operation, clean rooms,
laboratories and so on.

WPNEC / WAPA Polyurethane anti static wheels

Weight capacities from 80 to 500 kg and wheel diameters from 80 to 200 mm

WPNEC Conductivity Resistance R ≤ 10000 Ohm, WAPA Conductivity Resistance R ≤ 50 Megachu

Download the anti static wheel brochure for more specifications.

For Brackets choose from the wide range of the BZH series.

 

WNYEC Nylon anti static wheels

WNYEC antistatic wheels

Weight capacities from 100 to 520 kg and Wheel diameters from 80 to 200 mm

Conductivity Resistance R ≤ 10000 Ohm

Download the anti static wheel brochure for more specifications.

For Brackets choose from the wide range of the BZH series.

WGREC and WRNEC Series of Rubber anti static wheels

WGREC WRNEC RUBBER ANTISTATIC WHEELS

Weight capacities 50 to 500 kg and Wheel diameters 50 to 200 mm

WGREC Conductivity Resistance R ≤ 10000 Ohm, WRNEC * Conductivity range is 10^3 ohm to 10^4 Ohm, ** PAH-free rubber to conform to EU-directive 2005/69/EC

 

Download the anti static wheel brochure for more specifications.

For Brackets choose from the wide range of the BZH series.

Series 60AS antistatic Wheels

Series 60AS Antistatic wheels

  • Electrically conductive grey non-marking thermoplastic polyurethane tyred wheel (Shore 90-A).
  • Bearings supplied with 2RS shields (waterproof protection) as standard.
  • Scratch and tear resistant.
  • Not suitable for rough terrain.
  • Suitable in a wet environment.
  • Wheels have an electrical resistance of less than 10 4 (10,000) Ω in accordance with ISO 2882
  • Ball bearing bore (single bearing on 60 to 125 mm diameters)
  • Quiet, easy running.
  • Suitable for internal and external use. Example: concrete, ceramic tiles, asphalt etc.
  • Suitable for use where alcohol, hydrocarbons, solvents and weak acids are present.
  • Not recommended for use with strong bases.
  • Operating temperature -20ºC to +70ºC

 

Diameter mm Tread Width mm Bore mm Hub Width mm Load Capacity KG Weight KG Product Code
60
25 6 30 70 0.12 60AS0000
80
25 8 30 100 0.15 60AS0001
80
32 8 36 130 0.18 60AS0011
100
25 8 30 120 0.22 60AS0002
100
32 8 36 150 0.25 60AS0012
125
25 8 30 130 0.31 60AS0003
125
32 8 36 160 0.33 60AS0013
125
46 20 50 400 0.35 60AS0023
150
32 8 36 180 0.52 60AS0004
150
32 12 32 180 0.52 60AS0014
160
46 20 50 450 0.60 60AS0024
200
32 8 36 180 1.07 60AS0006
200
32 12 32 180 1.07 60AS0016
200
50 20 50 500 1.21 60AS0026

Datasheet for Series 60AS antistatic wheels

Pin It

Search our Online Shop.