Merlin Industrial Products

Steel Tilting Skip Bins available in 2 x capacities 250 and 400 kg as well as with a drainage tap and perforated base for wet waste such as swarf mixed in with coolant. For additional mobility options these UK manufactured bins can also be fitted with fork pockets.

• Tilting Skip Bins capacity 400 or 250 kgs.
• Fabricated sheet steel body mounted on square frame chassis.
• Reinforced body rim.
• No sharp edges.
• Handle for pushing and load dumping.
• Load will not tip until retaining latch is released by operator.
• Welded fork guides available as an option.
• 200 diameter wheels axle mounted front with single rear swivel castor, fitted with solid rubber tyres and roller bearings. 

Tilting Skip Bin with Perforated Base & Drain Tap

Tilting Skip Bin with Perforated Base & Drain Tap 400 and 250 kgs capacities. Fabricated sheet steel body mounted on square frame chassis. Reinforced body rim. No sharp edges.. Handle for pushing and load dumping.

Load will not tip until retaining latch is released by operator. Welded fork guides available as an option.

200 diameter wheels axle mounted front with single rear swivel castor, fitted with solid rubber tyres and roller bearings.

Fork Pockets can be fitted to the SB08 and SB10 tilting skip bins.