Standard and bespoke aluminium transportation or storage cases, containers, baskets and trolleys. Designed and manufactured for over 50 years in Germany, the Zarges aluminium cases offer unrivalled quality and precision along with lightweight protection for rare and valuable items.

K424XC Mobile Cases

K 424 XC Mobile Cases

The new K 424 XC combines the legendary quality of ZARGES cases with new mobility.

Sturdy, mobile aluminium box in ZARGES quality, long service life, a reliable companion.
Optimum mobility through integrated 50 mm castors and pull-out handle (Order No. 41810-41814) or second sprung drop handle on the end face (Order No. 41815).
Extremely smooth-running due to special castors, ø 50 mm, made from polyurethane and polyamide.
Stack-ability guaranteed through stacking corners made from impact-resistant plastic and integrated stacking elements in the support frame. Can also be stacked with containers in the ZARGES K470 and Eurobox series.
High load-bearing capacity of up to 50 kg despite the low dead weight.
Equipped as standard with removable base foam insert made from abrasion-resistant PE foam.
Beading all round and corner beads for additional dimensional stability.
Fitted with sturdy lid holding straps.
Peripheral foamed seal in the lid for protection against dust and splashwater.
ZARGES Comfort fasteners with extremely long service life, fitted with plug locks.
A wide range of adjustable interior fittings ensure versatility.
Optional wheel set 125 mm or off-road set 220 mm available for use in difficult terrain.
The K 424 XC series comprises 6 models with a capacity of 28 to 195 litres.

Note

The K 424 XC range is rounded off by a wide selection of carefully thought-out interior fittings and numerous solutions for easier handling.
Please also note the K 424 XC Mobile Box full equipment packages.
Clearance measurement approx. 30mm (1.2") less than internal dimension (length and width). Special sizes on request.

 

Order No.Internal dimensions L x W x H (approx. mm)Outside dimensions L x W x H (approx. mm)Volume (approx. l)Weight (kg)Max. permitted gross weight (kg)Pull handleTotal max. weight (approx. kg)
 41810 516 x 350 x 159 550 x 400 x 233 28 6.3 25.0 3-part 25.0
 41811 550 x 350 x 310 600 x 400 x 385 60 7.3 25.0 3-part 25.0
 41812 750 x 350 x 380 800 x 400 x 455 99 9.0 35.0 2-part 35.0
 41813 750 x 450 x 310 800 x 500 x 385 105 9.5 35.0 2-part 35.0
 41814 750 x 635 x 410 800 x 685 x 485 195 12.0 35.0 2-part 35.0
 41815 910 x 350 x 380 960 x 400 x 455 120 9.5 50.0 2. Sprung drop handle 50.0
 

 K 470 Universal Aluminium Containers

K470 Aluminium boxes

 

 

With 25 sizes, the K 470 series offers a unique selection of standard dimensions. Their capacity ranges from 13 l to 829 l. And if you do not find the right case for your needs in this range, ZARGES also offers individually designed special sizes.

Lid with stainless steel hinge strip, two lid straps and foamed seal all round.
Stacking corners made from diecast aluminium ensure safe stacking.
High level of stability due to 3 fully-welded aluminium profile frames.
Beading all round and corner beads for additional dimensional stability.
Extra thick 1.5-mm sheet metal for all K 470 containers from basic dimensions of 750 x 550 mm.
ZARGES Comfort handles for ergonomic handling and loads of up to 50 kg.
Ergonomic & durable C. fasteners for at least 20,000 operating cycles.
Snap fasteners: can be secured with a plug lock, lead seals, protection against bursting open or a padlock (max. shackle thickness 6 mm).

k470 aluminium case
Note

Clearance measurement approx. 30mm (1.2") less than internal dimension (length and width). Special sizes on request.
UN approval for the transportation of hazardous goods possible at additional charge.
Special inside inserts available on request.

Order No.Internal dimensions L x W x H (approx. mm)Outside dimensions L x W x H (approx. mm)Volume (approx. l)Weight (kg)Max. permitted gross weight (kg)
 40835 350 x 250 x 150 400 x 300 x 180 13 2.6 26.0
 40677 350 x 250 x 310 400 x 300 x 340 27 3.1 58.0
 40810 550 x 350 x 150 600 x 400 x 180 29 4.2 60.0
 40568 550 x 350 x 220 600 x 400 x 250 42 4.8 65.0
 40678 550 x 350 x 310 600 x 400 x 340 60 5.0 70.0
 40564 550 x 350 x 380 600 x 400 x 410 73 5.3 75.0
 40849 550 x 550 x 220 600 x 600 x 250 66 5.6 65.0
 40859 550 x 550 x 380 600 x 600 x 410 115 6.6 75.0
 40836 550 x 550 x 580 600 x 600 x 610 175 7.8 94.0
 40837 600 x 430 x 450 650 x 480 x 480 116 6.5 70.0
 40839 600 x 560 x 440 650 x 610 x 470 148 7.4 83.0
 40841 690 x 460 x 380 740 x 510 x 410 121 6.9 71.0
 40842 690 x 640 x 340 740 x 690 x 370 150 8.0 84.0
 40843 690 x 640 x 430 740 x 690 x 460 190 8.6 100.0
 40565 750 x 550 x 380 800 x 600 x 410 157 10.0 102.0
 40566 750 x 550 x 580 800 x 600 x 610 239 12.0 126.0
 40844 780 x 480 x 520 830 x 530 x 550 195 11.1 103.0
 40845 900 x 480 x 400 950 x 530 x 430 173 11.0 93.0
 40846 900 x 640 x 450 950 x 690 x 480 259 13.4 115.0
 40567 950 x 450 x 380 1,000 x 500 x 410 162 10.9 65.0
 40847 1,150 x 350 x 150 1,200 x 400 x 180 60 7.5 50.0
 40580 1,150 x 750 x 480 1,200 x 800 x 510 414 20.0 183.0
 40848 1,350 x 400 x 220 1,400 x 450 x 250 119 9.5 65.0
 40875 1,550 x 550 x 465 1,600 x 600 x 495 396 25.0 150.0
 40876 1,650 x 750 x 670 1,700 x 800 x 700 829 30.0 200.0
Custom Inserts for total protection

 

Mitraset Classic 19" housings

Mitraset Classic 19" Inch housings

Housing for electronic instruments

The anti-vibration frame is connected to the shell by rails and rubber bearings. The material and type of bearings are selected according to the specific requirements in each case.
Protection rating IP 65 in accordance with DIN EN 60529 and IEC 34-5/529 as a result of welded casing and lid with all-round seal.
Base with stacking battens , sheet metal cover with indentations to facilitate stacking .
All sizes (except NT610) can be stacked together.
Stable frame profile with integrated floating mounts for fasteners.
Sides with recessed sprung drop handles.
All the sides and the lid are stiffened with moulded sections (except NT610).
8 rubber bearings with sliding rails to accommodate the anti-vibration frame.
Lid with toggle-action snap fasteners.
Variable designs with different depths and heights.
Completely removable anti-vibration frame.
Welded-in rear wall is an option for all casings.
Shielding efficiency to MIL-STD-285
Height of lid = 63mm. Height of special lid varies according to design.
Designed to hold electronic equipment in a 19" grid in accordance with VG 95446


Note

Additional sizes available on request. Height of casing with stacking foot = external dimension (nominal size) + 11.5mm. Depth of special lid varies according to design.
Also available as UN-approved hazardous goods packaging.
Comprehensive range of special fittings for many applications.

Order No.Outside dimensions L x W x H (approx. mm)Weight (kg)
 45702 303 x 534 x 214 6.6
 45708 303 x 534 x 259 7.0
 45714 303 x 534 x 304 7.3
 45720 303 x 534 x 348 7.5
 45726 303 x 534 x 392 7.8
 45732 303 x 534 x 437 8.2
 45738 303 x 534 x 482 8.4
 45744 303 x 534 x 526 8.6
 45750 303 x 534 x 570 8.8
 45756 303 x 534 x 615 9.0
 45704 434 x 534 x 214 8.6
 45710 434 x 534 x 259 9.0
 45716 434 x 534 x 304 9.3
 45722 434 x 534 x 348 9.6
 45728 434 x 534 x 348 10.0
 45734 434 x 534 x 437 10.3
 45740 434 x 534 x 482 10.7
 45746 434 x 534 x 526 11.0
 45752 434 x 534 x 570 11.3
 45758 434 x 534 x 615 11.6
 45706 564 x 534 x 214 10.7
 45712 564 x 534 x 259 11.1
 45718 564 x 534 x 304 11.4
 45724 564 x 534 x 348 11.9
 45730 564 x 534 x 392 12.2
 45736 564 x 534 x 437 12.6
 45742 564 x 534 x 482 13.0
 45748 564 x 534 x 526 13.3
 45754 564 x 534 x 570 13.7
 45760 564 x 534 x 615 14.1
 45803 694 x 534 x 214 13.5
 45804 694 x 534 x 259 14.1
 45805 694 x 534 x 304 14.7
 45806 694 x 534 x 348 15.2
 45807 694 x 534 x 392 15.9
 45808 694 x 534 x 437 16.6
 45809 694 x 534 x 482 17.1
 45810 694 x 534 x 526 17.5
 45811 694 x 534 x 570 24.7
 45812 694 x 534 x 615 18.6
 45816 694 x 534 x 793  
 45863 856 x 534 x 214 16.2
 45864 856 x 534 x 259 16.8
 45865 856 x 534 x 304 17.4
 45866 856 x 534 x 348 17.9
 45867 856 x 534 x 392 18.6
 45868 856 x 534 x 437 19.3
 45869 856 x 534 x 482 19.8
 45870 856 x 534 x 526 20.2
 45871 856 x 534 x 570 20.8
 45872 856 x 534 x 615 21.3
 45876 856 x 534 x 793 23.8
 45878 856 x 534 x 882  
For more information and prices contact Merlin Industrial Products with the product codes and quantities that you require. 

Why Aluminium

 
 

Company Information

Vat GB591551821

Company Number 02906480

Facebook -Twitter - Blog - YouTube - Pinterest

Office Hours 9am to 5pm Monday till Friday

Except for UK National Holidays.

Call 01752 690622  Fax 0208 196 2223

sales@mipl.uk

Errors and omissions excepted (E&OE)