Digital door locks as well as being simple, convenient and effective to use, they’re totally self-contained and don’t have the need for any additional hardware. Digital door locks also don’t require keys, power, cards or tokens, all of which can be easily damaged, lost or stolen.
"Lockit" Digital Door Lock
• Keyless access for convenience & security
• Over 8,000 possible combinations
• Codes are easy to change – full instructions included
• Anti-thrust latch for added security
• Non-handed and easy to fit – template supplied
• Passage function – via snib holdback
• Available in Satin Chrome or Polished Brass finishes
• Recommended for light duty internal use
Lock – 141mm high x 40mm wide x 21mm deep. Fitted with short paddle handle
Internal plate – 142mm high x 41mm wide x 9mm deep. Fitted with 75mm long paddle handle
Latch diameter - 19mm
Backset – 60mm
Suitable for doors up to 54mm thick
Keylex 700M Digital Locks
For Use With Multi-Point Locking Mechanisms
• Keylex Medium Duty For Multi-Point PVCu Doors
• Suitable for medium / heavy duty applications
• Ideal for use on all residential door installations
• Over 4,000 possible combinations - Code can be changed in seconds
• Lever handle operation from both sides
• Stainless steel buttons will not indicate usage
• Operates with most conventional multi-point locks
• Key override (Optional) to bypass code and for night time locking
• Mechanical operation - no wiring or batteries required
• Integrates with any Euro Profile 'one key system'
• Please note: Door thickness required at time of ordering / Enquiry
Multi-Point Locks - Compatibility with the Keylex 700M
Multi-Point locks are used widely in both commercial and residential situations and offer increased security over conventional rim or mortice locks when used with a suitably high specification Euro profile cylinder or 5 lever system.
Just about every PVCu residential door installation employs a Multi-Point lock of one type or another - a deterrent to most casual burglars.
The introduction of a Keylex 700M mechanical digital lock to a door locked via a Multi-Point device actually enhances the security of that door. The ‘passage function’ of the lock, a standard feature of all Multi-Point locks, is automatically converted to a night latch function since, by default, the external lever can only be operated after entry of a valid code.
Multi-Point locks are available in the U.K. from a very wide range of different manufacturers, with available options too numerous to list.. However, some basic principles do apply and these are listed below.
Spindles & Followers - The Keylex 700M is supplied with a 7mm square spindle (and 8mm converter) and suits all Multi-Point lock followers accepting these sizes ‘on the square’.
Split spindles for escape lock situations are not available.
Lock Centres & Lock Case Sizes - Euro profile escutcheons are prepared and supplied (in pairs) to suit locks with 92mm centres. Alternatives are available to special order and include oval and 5 lever profiles.
Most lock case sizes are accommodated since the two Keylex 700M mounting pillars are spaced @ 290mm - split 160mm/130mm about the spindle.
Backset Lengths - The narrow stile Keylex 700M body easily allows installations with backset lengths down to 30mm - with no upper limit. Backset lengths usually vary between 30mm to 45mm in 5mm increments.
Door Thicknesses - Often, PVCu door profiles can exceed 50mm.To ensure we provide the Keylex 700M with a sufficiently long spindle and fixings pack it is essential that we know the door thickness at the order placement stage.
HANDING LOCKS (& DOORS)
All Keylex lock models are ‘field reversible’. Therefore you do not need to specify the hand of the lock when ordering. However, when installing the Keylex 700 on rebated double doors it is necessary to establish the hand of the door in respect of the rebate kit. There are four distinct handing codes describing four possible applications:
- LH Left Hand = Clockwise closing door with the digital keypad on the push side.
- LHR Left Hand Reverse = Anti-clockwise closing door with the digital keypad on the pull side.
- RH Right Hand = Anti-clockwise closing door with the digital keypad on the push side.
- RHR Right Hand Reverse = Clockwise closing door with the digital keypad on the pull side.
The hand of the lock is the same as the hand of the door. The hand of the rebate kit is the same as the hand of the lock.
REBATE KITS (ALL MODELS)
Two part rebate kits are available (stainless steel) in the following sizes to suit all series of Keylex locks; 13mm, 19mm and 25mm
EXTRA THICK DOORS (ALL MODELS)
Extra long fixings, spindle extensions and passage turn extensions are available to suit any door thickness.
BLANKING PLATES (ALL MODELS)
A blank plate for the passage function facility is available on the all Keylex models as are blanking buttons for the inside lever furniture on Keylex 700, 800 & 500 models only.
EMERGENCY & PANIC EXIT DEVICES (K2100 & K700 ONLY)
Conversions are available for all K2100 series and K700 series models allowing operation with rim mounted emergency exit and panic exit devices. Conversions are available for the following manufacturers’ devices (rim mounted applications only – including latch and vertical rod designs).
a) Briton b) Dorma c)Von Duprin
BACK-TO-BACK OPERATION (K2100 & K700 ONLY)
Bi-directional coded access control via the same door is achieved using either the Keylex model K2100 or K700 in a back-to-back application. ‘Back-to-back’ is not available on Keylex models K800 & K500. K700B is the factory built solution available ex-stock to suit doors 35mm to 50mm thick. K700B2 is the factory built solution available ex-stock to suit doors 50mm to 65mm thick. K2100B is our modification introducing a mounting plate to one side of the door.
This solution particularly addresses security requirements at external gates where it may be possible to access the ‘secure’ side of a gate by reaching through to the other side. This solution should never be introduced to doors on emergency exit routes.
SPY SHIELDS (ALL MODELS)
Where security is paramount and the opportunity for unauthorized observation of code entry exists, it is possible to introduce a spy shield to reduce the chance of code entry copying. Available to special order on all models.
KNURLED KNOB (K2100 ONLY)
The normally smooth knob design on Keylex model K2100 can be modified to introduce a knurled or textured finish.This facilitates extra grip for use by the elderly, infirm or operation by those who may have wet hands. Available to special order.
RIM MOUNTED SOLUTIONS (K2100, K800 & K500 ONLY)
Occasionally, door and frame designs dictate that conventional mortice lock solutions become impractical. Rim mounted solutions exist (for the models detailed above) and are, in the case of K800 & K500, normally available exstock. Because of the nature of their operation certain features such as passage function are unavailable. All rim mounted locks are supplied with knob furniture to both sides of the door.