A range of heaters, jackets and covers all designed for the international ISO IBC container that is one of the most popular ways of moving and storing chemicals. The range below includes waterproof covers through to insulated jackets and heaters designed to maintain the viscosity of various substances.
IBC Silicone Base Heater
An IBC silicone base heater is an effective and powerful way to heat up contents inside an IBC container.
The base heater is perfect for heating viscous or semi-solid products and making them very easy to discharge from a container with minimal to no waste product.
The 2700W base heater can heat e.g. water in a fully loaded IBC container from 15°C to 70°C in less than 40 hours. If a faster heating process is required we recommend adding an IBC insulation jacket to the process.
Silicone Base Heaters are produced in highly durable and long lasting silicone materials that easily can withstand the weight on a fully loaded IBC Container. The base heater fits a variety of intermediate bulk containers (IBC containers) including IBC containers from Schütz, GNX, Mauser, Werit and Greif.
The silicone base heater is very easy to install and to use - simply remove the bulk container from the IBC frame and install the silicone heater in the very bottom on the frame. Insert the container on top of the heater, fill the container and you are all set to heat the contents. This also makes the heater ideal for heating and maintaining temperature while transporting the IBC container.
The IBC silicone base heater can be mounted with an adjustable digital temperature controller for safe and precise temperature controlling.
Durable and long lasting silicone materials that easily withstands the pressure from a fully loaded IBC container.
- Dimensions: 1035 - 851mm.
- Materials: 100% silicone.
- 1,5 meter power cord with no plugs.
- 0-150°C PT100 Sensor System temperature controller (additional product).
- Heats water from 15°C - 70°C in less than 40 hours in a fully loaded IBC Container.
|13-1471||0-150°C||Temperature controller||200 x 120 x 120 mm.||N/A||N/A|
IBC Container Aluminium Foil Heater
Heating with an IBC Aluminium Foil Heater is an effective and low cost method to heat the contents from the bottom inside an IBC container.
Foil Heaters are manufactured to individual specification for use in a variety of intermediate bulk containers (IBC containers) including IBC containers from Schütz, GNX, Hoover, Mauser, Werit and Greif.
Unlike normal IBC aluminium foil heaters produced with a paper inner, our IBC alu heaters are produced with a full body aluminium construction, making our aluminium heaters more stable, durable and capable of withstanding the weight from a fully loaded IBC container.
The aluminium foil heater is very easy to install and to use - simply remove the bulk container from the IBC frame and install the heater in the very bottom on the frame. Insert the container on top of the alu heater, fill the container and you are all set to heat the contents. This also makes the heater ideal for heating while transporting the IBC container.
The aluminium foil heater is equipped with a bi-metal limiter, which limits the heater to a maximum of 50/60°C or 70/80° depending on the bi-metal installed.
The 1400W Aluminium heater can heat e.g. water in a fully loaded IBC container from 10°C to 43°C in less than 48 hours.
The aluminium foil heater is designed as a "single use" heater, which means that the product is to be discarded when used.
Reinforced aluminium foil with aluminium tube inside to withstand the pressure from the IBC container Bulk.
- Dimensions: 1095 - 895mm.
- Material: Full body aluminium foil.
- 1,5 meter power cable.
- Heats water in a fully loaded IBC tank from 10°C - 43°C in less than 48 hours.
- Designed for single use - to be discarded when used.
|Item no.||Thermostat / Limiter||Drum||Size||Volt||Watt|
|12-1193||50/60º C||IBC||1095-895 mm||230V||1080W|
|12-1196||70/80º C||IBC||1095-895 mm||230V||1080W|
|13-1296||70/80º C||IBC||1095-895 mm||230V||1400W|
IBC Top cover
The IBC Top Cover is a universal lid that fits any standard 1000L IBC container.
The top cover can be used together with the IBC Container Heater or the IBC Insulation Body Cover.
Using the lid together with a heater or insulation cover will minimize heating loss and help heating faster or maintaining temperature for a longer period of time.
The top cover has a strategically placed Velcro pad to access the top opening of the IBC container.
- Cordura material with Teflon coating.
- Water repellent.
- Chemical resistant.
- Standard Size: 1000L
|11-9861D||IBC||4400x1000 mm||IBC Top Lid|
Waterproof cover for IBC Containers
This waterproof PVC cover is perfect to secure an IBC container against water in moist environments. The seams on the cover are welded, which makes the cover perfectly waterproof.
The IBC cover is designed in a sizing that makes it possible to have an IBC Container Heater attached to the container underneath the cover, which makes it possible to safely heat contents in the container even en wet weather or in moist conditions.
The IBC Cover is produced in durable PVC plastic and is very easy to attach and detach to an intermediate bulk container (IBC).
The cover easily folds for minimal storage space.
- Produced in durable PVC materials.
- Welded seams for optimal waterproofing.
- Can be used in conjunction with an IBC Container Heater.
|11-9861E||IBC||4400x1000 mm||Waterproof PVC cover|
IBC Thermal Bubble Wrap Cover
IBC bubble foil insulation covers are designed to isolate and maintain the temperature of an IBC Container (Intermediate Bulk Container).
These thermal IBC aluminium bubble wrap covers are designed to provide optimal protection from solar radiation, blocking the direct sunlight and deflecting the radiation and the heat so that the containers can be transported and/or be placed outdoor without damage and overheating from the suns rays.
IBC bubble wrap covers are made of a metallic aluminium outer layer, which deflect the sun rays and a bubble wrap interlayer that helps to create space between the outer layer and the container, resulting in minimal to no heat transfer from the outside.
The Insulation cover is a one-piece cover, which is easily installed by pulling it down over IBC container – the insulating cover has a Velcro input from the top so that the IBC container top lid easily can be accessed.
- Metallic aluminium inner- and outer.
- Bubble wrap foil interlayer.
- Perfect heat and radiation blocking.
- Standard size: 1000L
|15-1736||IBC||4400x1000 mm||IBC Bubble Wrap Cover|
IBC Insulation Cover
The IBC insulated cover is designed to insulate and maintaining temperature inside an IBC intermediate bulk container. As for standards this insulation cover fits a standard 1000 litre container but also available for 1250 litre and 640 litre containers.
The standard insulation cover can also be used in conjunction with an IBC Foil heater to speed up the heating process. In this way the insulation cover helps insulating the container and speeds up the heating process.
The cover is designed in quality nylon materials, making the cover repellent to water.
The insulation cover is a full size cover with a lid and equipped with Velcro pads, which makes it very easy to attach or detach to a container. Furthermore there are strategically placed Velcro pads to access the natural openings on the IBC container.
- Nylon materials.
- Water repellent.
- Integrated lid.
- Strategically placed Velcro access pads.
- Standard Size: 1000L
- Also available in 1250L and 640L.
|15-1740||IBC 1000L||1200 x 1000 x 1140mm||Full IBC Insulation Cover|
IBC Insulation Body Cover
The IBC insulation body jacket is designed to insulate and maintaining temperature inside an IBC intermediate bulk container. As for standards this insulation cover fits a standard 1000 litre container.
The insulation jacket is designed in quality nylon materials and equipped with 4 quick release buckles for easy installation. This design allows the cover to be used in conjunction with an IBC Container Heater - just attach and power on the container heater first and then the insulated body cover as an outer layer. Tighten the straps and you will get a faster heating process. If you wish for an ever faster heating, an IBC Foil heater can be placed in the bottom of the IBC container.
In addition to heating or maintaining temperature, you can also add a top lid to the body cover.
- Nylon materials.
- Water repellent.
- Adjustable straps.
- Quick release buckles.
- Standard Size: 1000L
|13-1432||IBC||4400x1000 mm||IBC Insulation Cover|
IBC Container Heater 3 Thermostats
When in room temperature many materials often become viscous, which makes them harder to discharge from an IBC (Intermediate Bulk Container). In specific syrup, sugar, fats and others are difficult to discharge and often result in wasting products due to the thick viscosity not being able to leave the container.
This can end up being an expensive process unless you heat the (IBC) container first to make materials smoother and less viscous.
An IBC heating jacket is the perfect solution when it comes to quickly and effectively heating up fluids and materials making them very easy to empty from a container with minimal to no waste product.
The IBC heater is produced with either 1, 2 or 3 thermostats, all adjustable from 0 - 90°C, making the container heater very fast and safe to heat liquids and maintaining the wanted viscosity for the content in the container.
The IBC heater jacket is designed in a durable and long lasting high quality lightweight design and the construction together with quick release buckles makes the container heater easy to attach to any standard 1000L container.
This also makes this heater perfect to use when transporting 1000L containers with content that requires specific temperatures or viscosity.
TIP! For a faster and optimal heating process we recommend using the IBC insulated lid (sold separately). The lid easily attaches to the top of the container, reducing waste of heat.(Shown above)
Container heating jackets are an ideal supplement to container heating cabinets where the jacket is mounted to a single container. The container heating jackets can also be used in conjunction with heating cabinets or heating ovens making transportation of a heated container much easier and the heat loss minimal to none.
The container heater can be used to heat a variety of liquids, e.g. water, resin, oil, diesel fuel and many other industrial liquids and allows them to be poured or pumped with ease.
IBC Container Heater 2 Thermostats
Item 11-9860 IBC Container heater 1000L
230V 2 x 1000W
2 x Thermostat digital 0-90ºC
3 m. power cable
IBC Container Heater 1 Thermostats
Item 11-9860A IBC Container heater 1000L
1 x Thermostat digital 0-40ºC / 0-90ºC
3 m. power cable
|Item #||Container||Dimensions||Voltage / Power|
|11-9860||IBC||4400x1000 mm||230V 2x1000 W|
|11-9860A||IBC||4400x1000 mm||230V 1300 W|
|11-9861||IBC||4400x1000 mm||110V 2x1000 W|
|11-9861A||IBC||4400x1000 mm||110V 1300 W|
|11-9861B||IBC||4400x1000 mm||230V 3x1000 W|
ATEX IBC Container heaters
ATEX IBC Container heaters is a special heater type designed and approved to Ex Zone 2 compliance with 94/9 / EC (ATEX). The container heaters are perfect to safely heat and keep fluids frost free in an IBC container.
- Gentle and uniform heat transfer due to a dynamic and level depended heat emission
- Extended protection grade IP54 and hydrophobic materials
- Complete PTFE- (Teflon®) coating for a maximum long-life cycle and highest reliability against bases, acids, solvents, etc. – free of silicone.
- Circumferential (360º C) belts with adjustable buckles ensuring an optimal fitting and easy handling
- Real 3-dimensional design for an optimal fitting and heat transfer
- Nominal voltage: 115 or 230VAC, 50-60Hz
- Heating element: Self-limiting
- Power Connection: H07BQ-F, PUR coated, orange, acc VDE 0282 part 10 / HD 22.10
- Temperature Sensor: PT100 / Thermocouple (optional): EEx-e or EEX-i
- Surface resistance: <3*10?Ω/m²
- Ambient Temperature: -15ºC…+35ºC
- Protection grade: IP65
- Directives and Norms: Atex directive 94/9/EG
- DIN EN 60079-0, DIN EN 60079-7
- DIN EN 60079-30
- DIN EN 13463-1
- Marking:ATEX ll 3G Ex e ll T5
|12-1203||IBC Atex||4400x1000 mm||230V||1500 W|
|12-1204||IBC Insulated lid Atex||-||-||-|
|12-1201||PT 100 ATEX Sensor||-||-||-|
|12-1201A||Temperature controller||ATEX Control box||-||-|